SuperSpeed USBWireless USBOriginal USBHi-Speed USBOn-The-Go USBHi-Speed On-The-Go USB
 Universal Serial Bus
SuperSpeed USB Wireless USB Hi-Speed USB USB On-The-Go and Embedded Host Tools USB-IF eStore Documents USB-IF Compliance Program Cable Assembly Test Requirements Connector Test Requirements High-Speed Hub Test Requirements Low and Full-Speed Hub Test Requirements Integrators List Independent Test Labs High-Speed Peripheral Test Requirements Low and Full-Speed Peripheral Test Requirements Silicon Building Blocks Test Requirements High-Speed System Test Requirements Full-Speed and High-Speed USB OTG Product Test Requireme... USB FAQ Events Discussion Forum Join USB-IF, Inc. Resources
Home > Developers > USB-IF Compliance Program > Full-Speed and High-Speed USB OTG Product Test Requirements > Full-Speed and High-Speed USB OTG Product Test Requirements

Full-Speed and High-Speed USB On-The-Go Product Test Requirements

USB On-The-Go products must pass all certification test requirements for standard USB peripherals. In addition, the USB OTG product must pass the following tests:

  • Physical inspection for:
    • micro-AB receptacle
    • user interface display
  • Signal Quality as a host (A-Device)
  • Signal Quality as a device (B-Device)
  • OTG Electrical Test (OET)
  • OTG Protocol Test (OPT)
  • Interoperability with devices listed on the targeted peripheral list
  • Submission of completed USB OTG Compliance Checklist

The checklist requires identification of the receptacles and cable assembly used in the manufacture of the product. Products must use receptacles, connectors and/or cable assemblies that are currently on the Integrators List. Please refer to the USB On-The-Go Compliance Test Plan for the test methodology.  A complete list of downloadable USB OTG documents and tools, including the USB OTG Compliance Checklist and Compliance Plan is available on the OTG Developers page.

Labs

View the list of available labs that test this type of product.