 |
Wireless USB DocumentsWireless USB Specification Revision 1.0Wireless USB Specification Revision 1.0 (.zip format, size 3.96MB) Enclosed in this zip file are the following documents:
1. Wireless Universal Serial Bus Specification Revision 1.0 released May 12, 2005
2. Errata on Revision 1.0 as of July 2005
3. Errata on Revision 1.0 as of February 2007
4. Association Models Supplement Revision 1.0 released March 2, 2006
5. Wireless USB Adopter Agreement
Association Models Supplement FAQ as of June 19, 2007 (.pdf file format, size 90KB) Find frequently asked questions regarding Association Models provided in this document as a supplement to the Wireless USB Specification. Wireless USB Adopters AgreementTo become an adopter to the Wireless USB Specification, please complete the steps listed below. Step 1. Download the Adopters Agreement Step 2. Sign two originals Step 3. Keep one original for your files Step 4. Send one original to the address below: Wireless USB Technical DocumentsWireless USBCV Test Specification (WUSBCV), Rev. 1.0 (.pdf file format, size 476KB) This document contains a list of requirements from Chapters 4, 5, 6, and 7 of the Wireless USB specification. Chapter 8 is covered in separate documents for HWA and DWA. The individual requirements are presented in a section of test assertions. Each assertion is a specific requirement that must be met by a device, host, or wire adapter per the Wireless USB specification. Wireless USB Device Wire Adapter (DWA) Test Specification Rev. 1.0 (.pdf file format, size 424KB) This document is the test specification for USB-IF testing of Device Wire Adapter (DWA) products against the Wireless USB Wire Adapter Class. The Wire Adapter Class is described in Chapter 8 of the Wireless USB Specification. The requirements are presented with a series of test assertions. Each assertion is a specific requirement that must be met by a DWA per the Wireless USB specification. Device Wire Adapters are specific implementations of Wireless USB devices, in this respect a DWA must comply with various other test specifications. These Test Specifications contain test descriptions that provide specific test algorithms and Pass/Fail criteria for some of the assertions. These documents will focus on describing device tests that can be preformed with a standard Wireless USB Host.EVM Test Procedures for Wireless USB ProductsThere are three documents for the Wireless USB EVM Test Procedures. These documents are provided as a resource for EVM compliance testing. The EVM Test Procedures are required for the compliance program. Within each, the document for EVM testing outlines the test process for WUSB host and device adapters. Please determine which set of procedures meet your need based on your test equipment choice.
Test procedures for laptops with embedded WUSB Host Wired Adapters follows closely that of the procedure for testing external HWAs. The EVM test procedure, Appendix A, and PDK technical documentation outlines the steps needed to prepare a laptop or embedded system board silicon for EVM compliance testing. The EVM Test Specification defines a set of test criteria for Wireless USB products. The compliance criteria is provided as a list of test assertions that describe specific characteristics or behaviors that must be met for Wireless USB silicon incorporated in ready-to-ship products, reference designs, proofs of concept and one of a kind prototypes of peripherals, add-in cards, motherboards, or systems. Although not all of the assertions are verified with the Wireless USB EVM Test Tool and procedures, all products are expected to perform within the test criteria outlined within the Test Specification. USB-IF EVM Test ToolsThe EVM Test Tool and Wireless USBCV EVM Test Suite is designed to facilitate the EVM tests. These EVM Test Suites within Wireless USBCV are required in conjunction with the EVM test procedures and EVM Test Tool to perform each of the EVM Compliance Tests. The Wireless USB EVM Test Suites are a part of the Wireless USBCV installation. Each EVM Test Procedure includes the setup instructions to configure an USB-IF approved EVM Testbed required for compliance testing.
|
