Document Library

LEGAL DISCLAIMER
THESE SPECIFICATIONS ARE PROVIDED “AS IS” AND WITHOUT ANY WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED. WITHOUT LIMITATION, THERE IS NO WARRANTY OF NON-INFRINGEMENT, NO WARRANTY OF MERCHANTABILITY, AND NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ALL WARRANTIES ARE EXPRESSLY DISCLAIMED. USER ASSUMES THE FULL RISK OF USING THESE SPECIFICATIONS. IN NO EVENT SHALL USB-IF OR THE USB 3.0 PROMOTERS BE LIABLE FOR ANY ACTUAL, DIRECT, INDIRECT, PUNITIVE, OR CONSEQUENTIAL DAMAGES ARISING FROM SUCH USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Title Category Type Technology Date
eUSB2_1p1_09172018.pdf1.91 MBEmbedded USB2 (eUSB2) Physical Layer Supplement to the USB Revision 2.0 Specification, Rev. 1.1 Specification USB 2.0
vendorinfofilegeneratorrelease_1.2.3.1.zip2.61 MBUSB Vendor Info File Generator Version 1.2.3.1 Tools Test Tool USB 2.0, USB 3.2, USB Type-C
usbhtt.msi10.9 MBUSBHTT Ver 1.2.0.3 Tools Test Tool USB 2.0
USB20_32_BC12_Drop_Droop_1_4_1.pdf593.23 KBUSB2.0/3.2/BC1.2 Drop Droop
Test for non-USB Type-C™ Products
Tools Test Tool Instruction USB 2.0, USB 3.2, USB Type-C
USB2CV_1.5.6.0_Installer_-_x86_Release.exe21.21 MBUSB20CV x32-bit Ver. 1.5.6.0 Tools Test Tool USB 2.0
EHSETT_1.3.5.0_Installer_-_x86_Release.exe16.97 MBUSBHSET version 1.3.5.0 for EHCI 32-bit Tools Test Tool USB 2.0
USB2CV_1.5.6.0_Installer_-_x64_Release.exe22.06 MBUSB20CV x64-bit Ver. 1.5.6.0 Tools Test Tool USB 2.0
EHSETT_1.3.5.0_Installer_-_x64_Release.exe17.74 MBUSBHSET version 1.3.5.0 for EHCI 64-bit Tools Test Tool USB 2.0
USBET20_1_31_03_X86_Installer.msi7.21 MBUSBET20 Tools Test Tool USB 2.0
3.1_Interoperability_Testing_v0.9_w_USB_Type-C.pdf2.83 MBxHCI Interoperability Test Procedures For Peripherals, Hubs, Hosts with USB Type-C Specification Test Specification USB 2.0, USB 3.2, USB Type-C
USB_2_0_Electrical_Compliance_Specificationv1.06.pdf80.02 KBUSB 2.0 Electrical Test Specification Specification Test Specification USB 2.0
QuadraMAX_USB_Type-C_Tests_Manual.pdf117.24 KBQuadraMAX Manual Tools Test Tool Instruction USB 2.0, USB 3.2, USB Type-C
usb_type-c_locking_connector_specification_rev_1_0_20160309_0.pdf660.52 KBUSB Type-C(TM) Locking Connector Specification Specification Cable and Connector Specification USB 2.0, USB 3.2, USB Type-C
HSETT_Instruction_0_4_1.pdf741.09 KBEHCI and xHCI High-Speed Electrical Test Tool Setup Instruction Tools Test Tool Instruction USB 2.0, USB 3.2
HSETT_Instruction_0_4_1.pdf741.09 KBHSET Documentation version 0.41 for EHCI and xHCI Tools Test Tool Instruction USB 2.0
CabConn20.pdf672.65 KBUSB 2.0 Cable and Connector Class Document Specification Test Specification USB 2.0
USB-IFTestProc1_3.pdf1.33 MBUSB-IF Full and Low Speed Electrical and Interoperability Compliance Test Procedure Specification Test Specification USB 2.0
usb_20_20180904.zip13.94 MBUSB 2.0 Specification released on April 27, 2000
  1. The Original USB 2.0 specification released on April 27, 2000
  2. USB 2.0 Adopters Agreement
  3. Errata to the USB 2.0 specification as of December 7, 2000
  4. Mini-B connector Engineering Change Notice to the USB 2.0 specification
  5. Pull-up/pull-down Resistors Engineering Change Notice to the USB 2.0 specification
  6. Errata to the USB 2.0 specification as of May 28, 2002
  7. Interface Association Descriptor Engineering Change Notice to the USB 2.0 specification
  8. Rounded Chamfer Engineering Change Notice to the USB 2.0 specification as of October 8, 2003
  9. Unicode Engineering Change Notice to the USB 2.0 specification as of February 21, 2005
  10. Inter-Chip USB Supplement Revision 1.0 as of March 13, 2006
  11. Micro-USB Cables and Connectors Specification Revision 1.01 as of April 4, 2007 and corresponding Adopters Agreement
  12. USB 2.0 Link Power Management Addendum Engineering Change Notice to the USB 2.0 specification as of July 16, 2007
  13. High-Speed Inter-Chip USB Electrical Specification Revision 1.0 as of September 23, 2007
  14. Suspend Current Limit Changes Engineering Change Notice to the USB 2.0 Specification as of April 9, 2008
  15. 5V Short Circuit Withstand Requirement Change Engineering Change Notice to the USB 2.0 Specification as of December 22, 2008
  16. Device Capacitance Engineering Change Notice to the USB 2.0 Specification as of December 22, 2008
  17. Material Change Engineering Change Notice to the USB 2.0 Specification as of December 22, 2008
  18. USB 2.0 Phase-locked SOFs Engineering Change Notice to the USB 2.0 Specification as of December 22, 2008
  19. Micro-USB Micro-B ID Pin Resistance and Tolerance stack-up between D+ and D- Engineering Change Notice to the MicroUSB Specification to the USB 2.0 Specification, Revision 1.01 as of December 22, 2008
  20. Quad Type Cable Additional for Micro USB ECN as of December 29, 2009
  21. Clarification on the Chamfer on USB 2.0 Micro Connectors ECN as of March 23, 2010
  22. Maximum Unmating Force Value Definition to USB 2.0 Micro Connectors ECN as of March 23, 2010
  23. "On-The-Go Supplement to the USB 2.0 Specification" Adopters Agreement
  24. USB TEST_MODE Selector Values ECN as of July 26, 2010
  25. Errata for USB 2.0 ECN:  Link Power Management (LPM) - 7/2007 as of October 11, 2011
  26. On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification, Revision 2.0 version 1.1a as of July 27, 2012
  27. HSIC ECN as of May 21, 2012
  28. USB 2.0 Connect Timing ECN Update as of April 4, 2013
  29. HSIC Disconnect Supplement ECN as of September 18, 2013
  30. USB 2.0 VBUS Max Limit ECN as of August 11, 2014
  31. Embedded USB2 (eUSB2) Physical Layer Supplement to the USB Revision 2.0 Specification dated August 1, 2014
  32. USB OTG EH ECN Maximum Vbus Voltage dated November 26, 2014
Read More
Specification USB 2.0
QuadDraw.msi5.64 MBQuadDraw & QuadraView Software/Firmware Installer Tools Test Tool Instruction USB 2.0, USB 3.2, USB Type-C
QuadraMAX_PPS_Test_Manual.pdf787.88 KBQuadraMAX PPS Test Manual Tools Test Tool Instruction USB 2.0, USB 3.2, USB Type-C