USB 3.2

HUB3CV_x64 Tool Ver. 1.3.9.1

USB 3 Hub Command Verifier (HUB3CV) is the official tool for USB 3 Hub Framework testing. All USB 3.0 hubs are required to pass the Hub Framework tests in order to gain certification. The HUB3CV tool includes the xHCI Compliance Drivers for use with the HUB3CV. In order to use HUB3CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted. If you are running on 64-bit Windows, you must install the 64-bit CV. If you have any questions, please contact ssusbcompliance@usb.org.

NOTE: The USB3CV tool is supported on Windows 7 and above only.

HUB3CV Tool Ver. 1.3.9.1

USB 3 Hub Command Verifier (HUB3CV) is the official tool for USB 3 Hub Framework testing. All USB 3.0 hubs are required to pass the Hub Framework tests in order to gain certification. The HUB3CV tool includes the xHCI Compliance Drivers for use with the HUB3CV. In order to use HUB3CV, User Account Control (UAC) must be turned off. After turning off UAC, the system must be rebooted. If you are running on 64-bit Windows, you must install the 64-bit CV. If you have any questions, please contact ssusbcompliance@usb.org. NOTE: The USB3CV tool is supported on Windows 7 and above only.

USB3CV_x64 tool Ver. 2.1.10.3

USB 3 Command Verifier (USB3CV) is the official tool for USB 3 Hub and Device Framework testing. All USB 3.1 peripherals are required to pass the Device Framework tests in order to gain certification. The USB3CV tool includes the xHCI Compliance Drivers for use with the USB3CV. In order to use USB3CV, User Account Control (UAC) must be turned off. If you are running on 64-bit Windows, you must install the 64-bit CV. If you have any questions, please contact ssusbcompliance@usb.org.

USB3CV_Ver. 2.1.10.3

USB 3 Command Verifier (USB3CV) is the official tool for USB 3 Hub and Device Framework testing. All USB 3.1 peripherals are required to pass the Device Framework tests in order to gain certification. The USB3CV tool includes the xHCI Compliance Drivers for use with the USB3CV. In order to use USB3CV, User Account Control (UAC) must be turned off. If you are running on 64-bit Windows, you must install the 64-bit CV. If you have any questions, please contact ssusbcompliance@usb.org.